Leaking Bathtubs and Shower Trays? We Will Fix It
Problem wet areas in your home are a common incident and in many cases, they have the tendency to be high usage areas such as the kitchen sink and the bathroom.
Find the Best Available Bath Sealing Contractors In New Barnet London
Whereas the kitchen has the tendency to be more manageable and the issues relatively easy to fix, the shower room can be way more difficult to handle when it starts causing issues. This could be the time you need to call in a professional in your New Barnet Greater London (Barnet) London area.
We serve these local areas too:
- East Barnet
- Monken Hadley
- Hadley Wood
- Chipping Barnet
- Oakleigh Park
Given that the shower room has the tendency to be a highly wet location due to a fair amount of water being splashed while showering, it can begin to show some signs of wear and tear in susceptible places. These are normally in the seams where a shower tray or tub joins the wall tiles.
Absence of correct sealing on the edges of bathrooms and shower trays can prove to be a big difficulty as they can be the weak point where the water and mould eventually wear down and start seeping water through and gradually causing damage to plasterboards.
Bath Sealing in New Barnet
A typical symptom of this situation consists of a moist smell in the shower room. Sometimes, it can manifest on the lower levels first. A stain point will appear on the ceiling panels as a result of taking in water from the shower room leakages above. Apart from such a stain being an eyesore, there is an imminent threat if there are electrical wires near to the boards.
Such a leakage would need to be resolved rapidly by identifying the real leaking location and rectifying at the earliest opportunity to prevent any threat from escalating.
These sort of issues are common in shower room areas for 2 primary factors. One is normally inappropriate setup and insufficient sealing of the edges of tubs and shower trays. The other may be as a result of aging.
Some plumbing technicians may cannot select the best possible location for setting up a shower tray or tub which can result in leaking issues later. For instance, a shower head put in a location near to the window may result in the shower sprays falling on the window sill and stagnating there.
This can present a future problem just due to the fact that if the grouting or sealer used there is not waterproof and is considered ‘porous’, water will permeate in and make its way to the underlying plaster and timber.
Throughout construction and repair, it’s the best idea to ensure that your builder or repairman uses high-quality waterproof grout and silicone in your shower room as water has the tendency to reach unexpected places in the shower room after a shower.
New Barnet Shower Sealing
When it pertains to tubs, a common and recurrent problem for the majority of tubs seems to be caulking or sealing which splits regularly. Some property owners are surprised. The silicon fractures or has the tendency to retreat from the wall after a number of months.
Bead size has a lot to do with it. The fact that the width of the opening between the tub and the wall is irregular means that there will be sections that are larger while others are narrower, making it tough to decide the right size bead to utilise.
If you utilise a bigger bead, then you wind up having an overflow in the narrower area without the silicon discovering its direction into the gap. When you go with a smaller sized bead, your silicon ends up being inefficient in the bigger areas due to the fact that it disappears into the space without filling it.
Many property owners have shared that while opting on DIY, they use utmost care to prep the location to counter any wetness by completely scouring and cleaning with alcohol and letting it dry out for a number of days prior to the caulking. In spite of this the majority of people are doing a good job, but they still lament that it fails way quicker than they could have hoped.
One technique is to make sure that you fill the tub with water prior to caulking. This ensures that the tub is at its optimum weight and stretched out to leave an ideal gap. As soon as you do, the silicon has a better possibility of remaining in place for longer, presuming you have done the prep work well.
Shower Tray Problems
In some cases when dealing with a dripping shower tray, we have had to eliminate the tiles around the perimeter of the tray. More investigation normally reveals damp plywood that is heavily water damaged particularly if it is not WPB marine plywood.
In one circumstance, we observed that the perimeter of the shower tray still had the plastic covering that it came in. It is such things that make it evident that the preliminary installer was just what we describe as a cowboy builder, indicating they did a lousy fitting.
Sadly for the homeowner, something that should have just been a relatively straightforward repair job, turns out to be a project, and you wouldn’t desire another cowboy builder mishandling the repair.
Contracting a proven, careful and qualified repairman is essential in restoring an already complex matter without costing you an arm and a leg.
Silicone Seal Replacing in New Barnet
To this day, we’ve dealt with many straightforward cases where carrying out comprehensive cleansing and applying a tube of silicon around the leaking edges has actually solved the issues.
But in some instances, we found the problem to have gone further, particularly when the setup was not installed correctly and second-rate materials were used.
Why Seek The Help of Professionals?
As skilled specialists in shower room repair and renovation, we have worked on so many cases and observed the damage that is caused by a dripping tub or shower tray. Typically, it’s really costly if not fixed on time.
Although one can try and do a patch repair on it prior to the repairman gets there, it is suggested that you enlist the aid of an expert.
Every situation is so different, but after mindful evaluation of the problem, our specialists will be able to offer you with a workable option that will resolve your dripping tub or tray for a very long time to come.
It can end up being relatively tough to detail ways to repair a dripping tub or shower tray step by step due to the fact that the scenarios are so different.
However, what you can be guaranteed of when you call us in is that we will examine the problem, offer you an accurate diagnosis, then, based on that, offer a solution(s) that will rid you of the dripping problem for the longest time.
With our team on your side, you can say goodbye to all your bath leakage issues. We cover your area of New Barnet EN5 5. Call us today to make your appointment on 0333 335 0384